A Short Guide to Fixing Common Bike Problems

Excited to take your new bike out to the streets? Make a mental list to check every intricate part of your bike before you go. Learning how to maintain your bike keeps your bike safe, reliable, and steady without needing to spend a dime. Every cyclist should keep a basic toolkit on hand to cater towards a possible event of ride breakdowns. Toolkits must include a bike tire pump that has a built-in pressure gauge, tire levers, a tire patch kit, spare inner tubes, chain tubes, some extra links, lubricant, and torques and wenches.

  1. Fixing a Flat Tire

Fixing a flat tire requires basic understanding in spotting the problem areas that caused the tire to droop. The first step is to check the tire pressure to confirm that the tires are inflated properly before starting looking for holes. Usually, there will be the intended air pressure range labeled at the site of the tire. If this is the case, using a bike pump will get you back up in no time.

  1. Tightening up Loose Bolts

Before heading out, be sure that all the nuts and bolts that hold up your bicycle are secured. The problem areas that creates loose bolts are the pressure and fiction that develops with the seatpost, handlebars, and stems. Prevent from over tightening the nuts and bolts which can ruin the bike threads. Using a torque wrench makes tuning your screws more accurately with more control on the amount of force.

  1. Loosening a Stuck Seat

Getting passed down a second-hand bike from someone you know can be great! But it is also a real bother when you’re stuck with a seat that is too low or high. When loosening a stuck seat, start with fully loosening the binder and remove the bolt and collar. The next step is to spread lubricant around the problem area and leave it overnight. If the seat is still stuck, try to grip firmly around the saddle and attempt to twist the post until it is free. To prevent from having this problem for emerging again, have the seat post and tube well-greased and clean. In case you’ll need to disassemble the seat again, mark the correct height on to the post with some electrical tape.

If you are still confused, search for a professional in road bikes if needed. A professional bike shop most often has the right tools and equipment you need. Going to beastslive.com is one of them when searching for a good quality bike that is less of a hassle in maintenance.